Core Network Engineer (IP-MPLS) || Saudi Arabia

Dear all

We are looking for candidate engineers with the following skills and experience.

Function:  Core Network Engineer.
Location:  Saudi Arabia

In-depth knowledge of network switching and routing protocols and other technologies:
  OSPF.
  BGP.
  IS-IS
  MPLS and TE.
  VPN (layer2, and 3),Metro Ethernet, Q-in-Q, and GRE.
  Layer 2 and Layer 3 switching
  Bridging, VLANs, Trunking, and Spanning Tree,
  Ethernet Technologies, Link aggregation,
  DHCP, NAT, NTP, VRRP, SNMP, and DNS.
  Multicasting.
  VLSM, Route Summarization, Policy based routing, Route Filtering, and Redistribution
  Quality of Service.
  High Availability and failover technologies.
  Network Security, Firewalls, IPSec, and IPS.
  IPv6.
  Good experience in EMS and NMS.
  Shall able to translate HLD into LLD,able to develop Network Implementation Plan (NIP),Network Ready for Use (NRFU), Network Migration Plan (NMP).
  Good experience in the Project Implementation phase.
  Shall able to troubleshoot, analyze and resolve complex IP network.
  Shall have documentation skills and able to transfer and share the knowledge, of implemented network to the team members and the client.
  Experience in integration with third party vendor equipment and works with other technology teams.
Experience in installing packet core network including 2G/3G mobile, WiMAX and LTE.
Knowledge and hands-on experience in ZTE Datacom equipment will be an advantage.
 
Education and Qualifications:
  BS in Computer or Communications Engineering.
 At least 5 years hands-on experience.

Professional level certifications from one of top vendors, expert level will be an advantage.

Willing to start immediately.

The candidate MUST BE IQAMA HOLDER (Free Iqama + Transferable candidates are only acceptable).
  Non Iqama holder CVs will not be entertained
  Candidate must be immediately available

Who meet the above mentioned Criteria, please send their CV to hk@sis-limited.com for immediate Consideration

Kind Regards,

Hasan Kaji
Recruitment Consultant
  +966 53 306 4046
Tel  +966 1 455 7549
Fax  +966  1 455 6300
Skype  sis-hasan
Email  hk@sis-limited.com

Comments

Post a Comment

Popular posts from this blog

Lecture 4: Network Cabling and Tools

Image
3 Types of Ethernet cable are used in Networking 1-Straight through Cable 2-Cross Over Cable 3-Roll over cable Straight through cable, Cross over Cables are used for data transfer While Rollover cable is used to configure routers / switches / network devices. To remember which type of cable you should use, follow these tips:  To connect two serial interfaces of 2 routers we use serial cable .   To specify when we use crossover cable or straight-through cable, we should remember: Group 1: Router, Host, Server Group 2: Hub, Switch One device in group 1 + One device in group 2: use straight-through cable Two devices in the same group: use crossover cable For example: we use straight-through cable to connect switch to router, switch to host, hub to host, hub to server… and we use crossover cable to connect switch to switch, switch to hub, router to router, host to host HOW TO MAKE A NETWORK CABLE: 1. Unroll the required length of network cable and add a little extr...
Read more

Lecture 6(b): Subnetting Examples

Image
Before Going to Subnetting Examples put attention on below Slide it will help to solve exam Question: Subnetting Class C: Subnetting Class B: Subnetting Class A:  Note:According to Cisco in Subnetting First and Last Subnet is not Valid because 1st subnet contain Network Address of IP whom we go to Subnet in Last subnet Contain Broadcast Address,Practically we used that subnets otherwise it will wastage of IP's.Normally in exam question may be mention that 1st/last subnet included or excluded. Be Prepare for Quiz.In Next Post i Will explain VLSM and Route Summarization.
Read more

Lecture 3(a) :Transmission Media

Image
Media:   Sending of data from one device to another is called transmission of data , Medium used to transmit the data is called Media like (Cables,Waves,Laser). Transmission of data through Medium is called Transmission Media. Types of Media:     Guided (Wired)     Twisted Pair ,Coaxial cable, Fiber Optics .        Unguided (Wireless)                 Radio waves,Microwaves,Infared waves.  Lets Start From Guided Media: Cable are divided into three types according to their speed, cost, need etc. 1. Twisted pair cable 2. Co-axial cable 3. Fiber optic cable 1. TWISTED PAIR CABLE: A twisted pair wire consist of two bunches of thin copper wire and enclosed separately in a plastic insulator with conductor. One the wire is used to...
Read more