System Administrator required for Riyadh (Pakistani National only)

Analyze and design new servers and Storage Systems. Designed and Configured the WAN/LAN infrastructures, consisting of multiple Leased Line connections with load balancing.

Responsible for security equipment including WATCHGUARD FIREBOX XTM550 firewall with VPN users spam blocking utility, quarantine server, web blocker server, spam blocker and report server. As well as AVIRA antivirus Management Center.

Optimize LAN using performance reports and monitoring applications in 24x7 environments.

Manage backups for company’s data.( very important)

Maintained router and Switched configurations update and changed configurations depending on corporate requirements and documentation.

DNS &DHCP- Management of HQ and field offices.

Responsible for configuring and maintaining company’s ACTIVE DIRECTORY, FILESERVER, PRINTSERVER, ANTIVIRUS SERVER (AVIRA management console) and DATABASE SERVER utilizing windows 2008 server r2 standard edition.

Responsible for research, acquisition and configuration of all new network and server hardware systems.

Supported and deployed network infrastructures in a multi-vendor environment. Platforms deployed and managed include CISCO 1800 SERIES, CISCO CATALYST 2960 and WATCHGUARD XTM 550, switches and remote servers.

Virtual Private Network (VPN) solution utilizing 2008 server. Or XTM5 Series Watchguard for VPN solution

Responsible in configuring and maintaining our FTP server

Maintains the Company’s terminal server

Install and maintains the companies VPN and Remote access server (2008 server)

Maintained local area network for engineering group, which included workstations and several servers, both domain and member application, network printers, and associated hardware using windows 7 and Server 2008.

Maintains the company’s Domain Controller

Should have knowledge in creating and configuring e-mail servers such as exchange or same.

Please email resume to rahatfarry@hotmail.com

Comments

Post a Comment

Popular posts from this blog

Lecture 4: Network Cabling and Tools

Image
3 Types of Ethernet cable are used in Networking 1-Straight through Cable 2-Cross Over Cable 3-Roll over cable Straight through cable, Cross over Cables are used for data transfer While Rollover cable is used to configure routers / switches / network devices. To remember which type of cable you should use, follow these tips:  To connect two serial interfaces of 2 routers we use serial cable .   To specify when we use crossover cable or straight-through cable, we should remember: Group 1: Router, Host, Server Group 2: Hub, Switch One device in group 1 + One device in group 2: use straight-through cable Two devices in the same group: use crossover cable For example: we use straight-through cable to connect switch to router, switch to host, hub to host, hub to server… and we use crossover cable to connect switch to switch, switch to hub, router to router, host to host HOW TO MAKE A NETWORK CABLE: 1. Unroll the required length of network cable and add a little extr...
Read more

Lecture 6(b): Subnetting Examples

Image
Before Going to Subnetting Examples put attention on below Slide it will help to solve exam Question: Subnetting Class C: Subnetting Class B: Subnetting Class A:  Note:According to Cisco in Subnetting First and Last Subnet is not Valid because 1st subnet contain Network Address of IP whom we go to Subnet in Last subnet Contain Broadcast Address,Practically we used that subnets otherwise it will wastage of IP's.Normally in exam question may be mention that 1st/last subnet included or excluded. Be Prepare for Quiz.In Next Post i Will explain VLSM and Route Summarization.
Read more

The CPU was previously shutdown due to thermal event overheating service the unit right now

Check you system fans are spinning on start up (and they don't stop). Put your computer in the coolest place available, preferably somewhere with air conditioning, and be sure there is space around the box for sufficient airflow. Open the box and remove any dust that has accumulated, particularly on the heat sink and fan(s) blades by using air blower. Blades can get very dirty over time without regular maintenance. The next step would be to remove the heat sink from the CPU (when the computer is off!), Apply silver thermal paste to the cpu and reattach the heatsink and fan. This would improve heat transfer. Determine the temperature of your processor in BIOS or third party tool,normal range from 60-65 ° C for the Pentium 4 While Maximum temperature for the processor is 95 c (Celsius). Processor Overheating Create Following Problems: Reduction of CPU life-span; Random freezes; Random restarts and Shutdown; Eventually the CPU can get burned. Note:Temperature Varies accordin...
Read more